longitudinal Seam Welding Machine
Product Description
Plate Automatic Welding Machine longitudinal Seam Welding Machine
1. Product Picture of longitudinal Seam Welding Machine
2. Product Introduction of longitudinal Seam Welding Machine
1. Appearance of obverse welding side beautiful and uniform, excess weld metal is less than 1mm, the width deviation is less than 1 mm.
2. 100% weld penetration, appearance of obverse welding side beautiful and uniform, excess weld metal deviation is small.
3. Make sure not break the arc during the welding process.
4. Plate surface can't scratch.
5. Ensure within 30 mm near the weld seam and the weld seam without oil, burr, rust and other defects.
6. The gap between two plates less than 1mm; Unfitness of butt joint is less than 10% of the plate thickness.
7. Must add arc starting and arc stopping plate.
3. Product Technical Parameters of longitudinal Seam Welding Machine
| Effective Welding Length | 8000mm | ||||
| Welding Metal Base | Aluminium alloy | ||||
| Thickness of the Metal Base | 3-7mm 3-7mm(Make groove if the thickness of plate more than 6mm) | ||||
| Welding process | Tig | ||||
| Arc control | The arc voltage automatic tracking system | ||||
| Effect of the Welding Seam | One-Side is Welded; Two Sides are Shaped. (No need open groove) | ||||
| Way of Pressing the Work Piece | The Cylinder Keyboard Pressed | ||||
| Welding speed | 50-300mm/min | ||||
| Molding groove material | Stainless steel(double groove,Three sections of arc transition, groove depth is 2mm) | ||||
| Molding groove cooling type | Water cooling | ||||
| Travel speed (empty) | Infinitely variable speeds(The adjusting range is 0 to 4000 mm/min) | ||||
| Welding torch quantity | 1 set | ||||
| Positioning device | 4 sets | ||||
| Electric feeding device | 4 sets | ||||
| Electric discharging device | 4 sets | ||||
| Effect of the Welding Seam | One-Side is Welded; Two Sides are Shaped. | ||||
| Power voltage | AC380 50HZ | ||||
| Machine power | 30KW | ||||
| Welding Current | 3 to 450 A | ||||
| Duty cycle | 450A at 100% - 40°C | ||||
| Off-Load Tension | 110 V | ||||
| Arc pilot circuit | 7 - 25 A / 100 % | ||||
| Mains supply | 230 / 400 / 415 / 440 V- 3 pH. 50-60 Hz | ||||
More products for you to choose
Company show
3.Our Market
Contact us if you need more details on Longitudinal Seam Welding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Tig Welding Machine for Sale、Aluminum Metal Welding Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Welding Machine
Premium Related Products
