Plate automatic welding machine rolling seam welding machine

Plate Automatic Welding Machine rolling seam Welding Machine

 

 

1. Product Picture of rolling seam welding machine

 

 

2. Product Introduction of rolling seam welding machine

1. Appearance of obverse welding side beautiful and uniform, excess weld metal is less than 1mm, the width deviation is less than 1 mm.
2. 100% weld penetration, appearance of obverse welding side beautiful and uniform, excess weld metal deviation is small.

3. Make sure not break the arc during the welding process.

4. Plate surface can't scratch.

5. Ensure within 30 mm near the weld seam and the weld seam without oil, burr, rust and other defects.

6. The gap between two plates less than 1mm; Unfitness of butt joint is less than 10% of the plate thickness.

7. Must add arc starting and arc stopping plate.

 

3. Product Technical Parameters of rolling seam welding machine

 

Effective Welding Length		8000mm
Welding Metal Base		Aluminium alloy
Thickness of the Metal Base		3-7mm 3-7mm(Make groove if the thickness of plate more than 6mm)
Welding process		Tig
Arc control		The arc voltage automatic tracking system
Effect of the Welding Seam		One-Side is Welded; Two Sides are Shaped. (No need open groove)
Way of Pressing the Work Piece		The Cylinder Keyboard Pressed
Welding speed		50-300mm/min
Molding groove material		Stainless steel(double groove,Three sections of arc transition, groove depth is 2mm)
Molding groove cooling type		Water cooling
Travel speed (empty)		Infinitely variable speeds(The adjusting range is 0 to 4000 mm/min)
Welding torch quantity		1 set
Positioning device		4 sets
Electric feeding device		4 sets
Electric discharging device		4 sets
Effect of the Welding Seam		One-Side is Welded; Two Sides are Shaped.
Power voltage		AC380 50HZ
Machine power		30KW

 

 

 

Welding Current		3 to 450 A
Duty cycle		450A at 100% - 40°C
Off-Load Tension		110 V
Arc pilot circuit		7 - 25 A / 100 %
Mains supply		230 / 400 / 415 / 440 V- 3 pH.  50-60 Hz

 

 

 

More products for you to choose

 

 

 

 

 

 

 

 

 

 

 

 

Company show

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.Our Market

 

 

 

 

 

 

 

Main Markets:	South Asia
	North America
	South America
	Mid East
	Southeast Asia
	Africa
	Eastern Europe
	Western Europe
Total Annual Sales Volume:	US$50 Million - US$100Million
Export Percentage:	31% - 40%

 

 

 

 

Contact us if you need more details on Rolling Seam Welding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Tig Welding Machine for Sale、Aluminum Metal Welding Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Welding Machine