Product Description
Inconel 625 Plate,Nickel Chrome Alloy,Nickel Chromium Alloy Manufacturers and Suppliers in China
China Inconel 718 Bar,Inconel 625 Round Bar,Inconel 718 Round Bar Manufacturer
China Nimonic Alloy,Nimonic Alloy 90,Nimonic Alloy 75 Supplier
Stainless Steel Plate,Stainless Steel Sheet,Austenitic Stainless Steel Manufacturer in China
Offer Kovar Sheet,Invar 36 Bar,Invar 36 Round Bar From China Manufacturer
China Welding Wire,Mig Welding Wire,Nickel Welding Wire Manufacturer and Supplier
Alloy Wire,Nichrome Wire,Resistance Heating Wire Manufacturers and Suppliers in China
Monel bars and rods,Monel pipes and Tubes,Monel sheets and Plates Manufacturer in China
Inconel pipes and Tubes,Inconel sheets and Plates,Inconel coils and Strips Manufacturers and Suppliers in China
Offer Incoloy sheets and Plates,Incoloy coils and Strips,Incoloy wires and Ropes From China Manufacturer
China Nimonic bars and rods,Nimonic pipes and Tubes,Nimonic sheets and Plates Manufacturer and Supplier
Hastelloy bars and rods,Hastelloy pipes and Tubes,Hastelloy sheets and Plates Manufacturers and Suppliers in China
China Ph stainless steel bars and rods,Ph stainless steel pipes and Tubes,Ph stainless steel sheets and Plates Manufacturer
Nimonic 80A (UNS N07080)
Nimonic 80A Chemaical composition Nimonic 80A Physical properties Nimonic 80A minimum mechanical properties in the room temperature Nimonic 80A is a nickel-chromium alloy similar to NIMONIC alloy 75 but made precipitation hardenable by additions of aluminum and titanium. The alloy has good corrosion and oxidation resistance and high tensile and creep-rupture properties at temperatures to 1500°F (815°C). Usage: This alloy is used for turbing blades, discs, forgings, ring sections, hot-working tools and high-temperature springs.
UNS Trademark W.Nr N07080 Nimonic 80A 2.4952
Grade % Ni Co Cr Fe Zr B C Mn Si S P Cu Al Ti Nimonic 80 Min Rest 18.0 1.0 1.8 Max 2.0 21.0 3.0 0.15 0.008 0.13 1.0 1.0 0.015 0.02 0.2 1.8 2.7
Density 8.19 g/cm3 Melting point 1320-1365°C
Heat treatment Tensile Strength(σb/MPa) Yield Strength(σp0.2/MPa) Elongation(σ5 /%) Solution treatment 930 625 25
01. Material Steel Grade Monel 400 Material Type Available in cold rolled and hot rolled 02. Alloy Series Hastelloy C276, Hastelloy C22, Hastelloy B3, Hastelloy B2, Hastelloy X ... Incoloy 825, Incoloy 800, Incoloy 925, Incoloy 901 ... Inconel 600, Inconel 601, Inconel 625, Inconel 718, Inconel x-750 ... Monel 400, Monel k500, Monel 404 ... Nimonic 80a, Nimonic 75, Nimonic 90 ... Alloy20, Alloy28, Alloy75; Nickle 200, Nickle 201, GH3030, GH2132, Invar36 etc. 03. Application Construction, machine structure, agriculture equipment, water and gas pipes etc. 04. Standard GB, UNS, DIN, ASTM, ASME 05. Packing Standard export packing 06. Delivery Time 1.10days after receving the deposit of T/T 2.10days after receving the L/C original 07. Trade Terms FOB, CFR, CIF etc. 08. Loading Port Shanghai,Ningbo 09. Payment Terms 1.30%T/T in advance, the balance against the B/L copy 2.30%T/T in advance, the balance against the L/C at sight
Jiangsu Seonjip Technology Co.,Ltd.
Jiangsu Seonjip Technology Co., Ltd . is located in the Dainan Economic Development Zone of Jiangsu province. Transportation is very convenient; there is only one hour away from Yangtai Airport. Moreover, it is on the east of 204 national roads and near to Ningjinyan and Jinghu Motorway. The company has 506.6 millions RMB total assets, 174 millions RMB capital assets, 346864 square meters site area, and 121400 square meters building area. There are more than 1300 workers which include 31.3% of college graduates and 13.4% of senior officers. Jiangsu Seonjip Technology Co., Ltd. is established in May 2005. The main products are internal-combustion engine valve steel bars, bearing steels, die steels, stainless steel heat-resistant steels, engine valves, dampers, HR electrothermal alloys and stainless steel products. Seonjip is a large manufacturing enterprise which contains melting, forging, hot rolling, heat treatment, cold drawing, straightening, peeling, grinding, crack detection and physicochemical testing. Seonjip is able to produce 100 thousands tons of special steels and alloys every year. The products are applied to automobiles, petrochemical industry, machinery, boiler, and all manner of engine valves. We have found a good sale in Italy, Korea, India and some other countries in the Middle East. We have invested more in technical improvements and new product developments. Using technology to open up market, using quality to pursue benefit, and treating Beijing General Iron and Steel Research Institute, Shanghai Material Research Institute, Southeast University and Wuhan University of Technology as backup force to successfully and independently develop the series of internal-combustion engine valve steel bars. This product is awarded as [Taizhou Famous-Brand Product", [Taizhou Top Ten Advanced Technology Product", high performance new engine valve steel bars is awarded as [Taizhou Scientific and Technological Achievements Second Prize". It is also approved by government for [Stated Advanced Technology Product", [Project for Tackling Key Problems in Science and Technology", and [National Torch Plan Project". The main performance index of our product is reached the international advanced level and the whole engineering level is on the leading position in China. Looking far ahead and aiming high, Seonjip Technology Co., Ltd will satisfy customers` requirements by advanced equipments, perfect management, and approving price. Based on centuplicate faith, warm and sincere service, we honestly hope that we can build good cooperative relationship with worldwide colleagues and friends to conspire the way of growing and discuss the project of developing. Hand in hand to build a bright future!
Company Info
- Company Name: Jiangsu Seonjip Technology Co.,Ltd.
- Representative: Allen Zhu
- Product/Service: Alloy Steel Products , Special Stainless Steel , Casting Master Alloy , Deforming Superalloy , Nickel Base Corrosion Resistant Alloy , Precision Alloy
- Capital (Million US $): 10000000000RMB
- Year Established: 1999
- Total Annual Sales Volume (Million US $): Above US$100 Million
- Export Percentage: 41% - 50%
- Total Annual Purchase Volume (Million US $): US$2.5 Million - US$5 Million
- No. of Production Lines: above 20
- No. of R&D Staff: 51 -60 People
- No. of QC Staff: 21 -30 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 30,000-50,000 square meters
- Factory Location: No.68 Xingtai Road ,Hailing District,Taizhou City ,Jiangsu Province China
- Contact Person: Mr. Allen Zhu
- Tel: +86-523-86550001
Premium Related Products
Other Products