Model No.: i5
Bodor laser Cutting Machine
Details of laser cutting machine:
|X/Y-axis positioning accuracy||0.03mm|
|X/Y-axis repositioning accuracy||0.02mm|
|X/Y-axis Max. linkage speed||60m/min|
1. Cast iron bed
Cast Iron Bed is independently developed by Bodor Laser. It is cast in a single chip with a minimum tensile strength of 200Mpa. The notch sensitivity ans thermal sensitivity of the bed are lower, and the lose of equipment is reduced. So the machine accuracy could maintain for a long time, and no deformation in a life cycle.
Applicable to various focal lengths, which are controlled by machine tool control system. Focal point will be automatically adjusted in cutting process to achieve the best cutting effect of different thicknesses sheets metal.
Focal length is controlled by operating system. We don't need to do manual regulation,which effectively avoids errors or faults caused by manual operation.
It can automatically adjust the most appropriate focal points in working process, greatly improving cutting speed;
When replacing different materials or different thicknesses sheet, manual focus laser head needs to adjust focal length manually, very inefficient; auto focus laser head can read system storage parameters automatically, very efficient;
Increasing perforation focus length, separately setting perforation focal length and cutting focal length, enhance cutting accuracy.
Built-in double water-cooling structures can ensure constant temperature of collimating and focusing components, avoid lenses overheating and extend service life of lenses.
Increasing collimation protective lens and focus protective lens, carefully protect key components.
3. Operating system display
Elegant appearance curve. The first one to use UI design in the world which lets display respond to processing table, making processing more intuitive. Elegant curves precisely fit machine body. Strong waterproof breathable system creates the best space, making operation more convenient. Diamond cutting process and HD plasma tempered glass make screen more exquisite and comfortable to use.
4. Cast aluminum crossbeam
Integral steel mold pressure casting, light, flexible and efficient. After artificial aging, solution treatment and finishing, crossbeam owns good integrity, rigidity, surface quality, toughness and ductility. Aluminum alloy's metal characteristics of light weight and strong rigidity are helpful to high speed movement in processing, and high flexibility is beneficial to high-speed cutting of various graphics based on high accuracy. Light crossbeam can give equipment a high operation speed, improving processing efficiency to ensure processing quality.
5. BodorPor 2.0
Independent R&D operating system, perfectly combines high efficiency and simplicity with inclusiveness. The operating system can realize intelligent layout of graphics cutting and support the import of multiple graphics, optimizing cutting orders automatically, searching edges smartly and automatic positioning. Control system adopts the best logic programming and software interaction, provides stunning operation experience, effectively enhancing the utilization of sheet metal and reducing waste. Simple and fast operation system, efficient and accurate cutting instructions, effectively improve the user experience.
6. Appearance design
Aesthetics was introduced to industrial ID, perfect combination of technology and aesthetics. Powerful hockey stick shaped decorations adopt black acrylic with thickness of 30mm, ice film drawbench silver design of the same car and alpine white sheet metal, the international design style is accepted by global consumer groups. With precise cast iron bed, the whole machine is as firm as a rock. The most reasonable golden ratio and the greatest parts layout make the whole machine more stable, comfortable, accurate, and technological. PC head capsule design through vacuum hot deformation processing makes Z axis so light. Crossbeam adopts ribbon design elements, giving crossbeam limitless velocity space.
1. Application of gantry structure and integrated cast cross-girder to achieve, higher rigidity, stability, shock resistance.
2. High-performance laser source and stable operating system which make the best cutting effect.
3. The machine owns perfect cooling system, lubrication system and dust removal system, to ensure that
4. The machine is capable of automatic height adjustment to maintain constant focal length and stable cutting quality.
5. The machine is used for cutting a variety of metals with excellent and stable cutting quality.
6. The specialized CAD / CAM automatic programming software and automatic nesting software aim to maximally save raw materials.
7. Access to the CNC system through Ethernet interface makes communication and remote monitoring possible during the laser cutting process.
1.France MOTOREDUCER: Satellite gears and double-supported on hardened and ground shafts with full-complement needle bearings increasing torsional stiffness
2.Wifi control system: To provide speedy service and we offer wifi function for our technician operates troubleshooting and adjust parameters remotely.
3. Japan SMC Pneumatic Components: Stepless control of air pressure proportionalto the eletronic signals; Serial communications specifications; Compact/lightweight (integrated communication parts)
4. Japan Yaskawa servo motor : The increased the power demands of largeautomation components utilize the robust performance of SGM7G
5. Japan NSK bearings: These bearing housings have square flange which can be easily attached to a machine with four bolts with its simple mounting face, this bearing unit is widely used.
6. France Schneider Electronic Components: Circuit protection against short-circuit currents,overload currents.
7. Auto lubrication systemL: Electrical lubrication is a kind of Gear pump with rational construction, great performance, complete functions.
1. We will conduct strict quality inspection before shipment.
2. Our wooden case is after fumigation treatment. Needn't timber inspection, saving shipping time.
3. All the spare parts of the machine were covered by some soft materials, mainly using pearl wool. Avoiding all damages that could happen in the delivery process.Then we'll covered plastic wrap out it tightly, make sure intact of the covered soft materials, also avoiding waterproof and rust proof.
4. The outmost is wooden case with fixed formwork.
5. The bottom of the wooden case has firm iron jack, convenient to Handling and transport.
1.Guarantee for 3 years.
2. Maintenance free of charge for 3 years .
3.We will provide the consumable parts at an agency price.
4.24 hours online service, free technical support.
5.Machine has been adjusted before delivery, operation disk is included in the delivery. If there is any other questions, pls kindly tell me.
7. We have manual instruction and CD (Guiding Videos) for software Installation, operation and machine's using and maintenance.
Jinan Bodor CNC Machine Co., Ltd was founded in 2002. Since 2008 we formally changed name to Bodor with RMB 10 million registered capital. We Bodor Laser is top leading manufacturer and supplier for many kinds of CNC Metal Fiber Laser Cutting Machines, Co2 Laser Engraving & Cutting Machines and Laser Marking Machines with 15 YEARS EXPERIENCES, 3 YEARS WARRANTY, SWISS TRENDY DESIGN, EUROPEAN QC SYSTEM and CE, FDA, ISO9001 and SGS CERTIFICATE.
For 14 years, Bodor cnc laser machines have covered most of Chinese market and have exported to more than 100 countries in North America, South America, Europe, Asia, Australia, Middle East, Africa, etc. Bodor Laser will do our best to provide you suitable laser solutions. We welcome you to join Bodor family, and share top laser products and services together with word-wide customers.
If you are interested in any of our products, please feel free to contact us, hopefully to be your trusted factory and supplier in China!
Q1: I knew nothing about this machine, what kind of machine i should choose?
Re: Very easy to choose. Just tell us what you want to do by using CNC laser machine, then let us give you perfect solutions and suggestions.
Q2: When I got this machine, but I don't know how to use it. What should I do?
Re: We will send video and English manual with the machine. If you still have some doubts, we can talk by telephone or skype and e-mail.
Q3: If some problems happen to this machine during warranty period, what should I do?
Re: We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sales service. So any doubts, just let us know, we will give you solutions.
Q4:Before sending me an inquiry on our fiber laser, it is better for you to provide me the following information
1)Your metal or non-metal material size?
Because in our factory, we have different models according to working area.
2)Your materials?Metal/Non metal:
3)You want to engrave or cut?
If cut, could you tell me your cutting thickness? Because different cutting thickness need different laser tube power and laser power supplier.
Note: The configuration and price of this product are for reference only. The price and details of all Bodor Laser‘s products are subject to the actual quotation.
Jinan Bodor CNC Machine Co., Ltd.
Super Factory, International Quality
The white floor & the largest monomer laser cutting equipment production workshop in the world (30,000 square meters); Production meets the European standards and international quality control, obtains certificates such as CE/ISO9001/SGS etc.
Strong and Professional R&D Team
R&D center owns 100 researchers, which is No.1 in laser cutting field. Ten millions funds are invested into R&D projects each year; New research achievements bring us more efficient cutting methods and more perfect cutting effect.
- Company Name: Jinan Bodor CNC Machine Co., Ltd.
- Representative: Jay Kong
- Product/Service: Laser Cutting Machines , Fiber Laser Cutting Machines , Laser Tube Cutting Machines , Laser Metal Sheet Cutting Machines
- Capital (Million US $): 28,000,000.00 RMB
- Year Established: 2008
- Total Annual Sales Volume (Million US $): Above US$100 Million
- Export Percentage: 61% - 70%
- Total Annual Purchase Volume (Million US $): Above US$100 Million
- No. of Production Lines: 5
- No. of R&D Staff: Above 100 People
- No. of QC Staff: Above 100 People
- OEM Services Provided: no
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: Bodor Laser R&D and Production Base: No. 1000, Chunbo Road, Gaoxin East District, Jinan City
- Contact Person: Ms. Stella
- Tel: 86-186-15658182
Premium Related Products