Box Beam Welding Line, China Box Beam Welding Line Manufacturers & Suppliers.

BAFFLE ASSEMBLING MACHINE
inquiry

Products description:
Model No:XJZ12
XJZ12 BAFFLE ASSEMBLING MACHINEThis equipment is the special machine is used to assemble and weld the middle reinforcing plate in the middle of box beam. The operation on the equipment is simple and easy. It consists of base support, turning working table, turning transmission device, clamping...

Catalog: Box Beam Welding Line

END-FACE MILLING MACHINE
inquiry

Products description:
Model No:XM1510
XM1510 END-FACE MILLING MACHINEBecause of the high speed development of the society, the engineering quality level for the steel structure required by people is higher and higher, then the jointing face to face of H beam, Box-beam and long thin parts, thus the end-face milling become a very...

Catalog: Box Beam Welding Line

BACKING WELD MACHINE
inquiry

Products description:
Model No:XQHB-CO2
XQHB CO2 BACKING WELD MACHINEThis machine is made for the purpose of CO2 gas shield welding on the box-beam that has finished the assembling. The box-beam after assembling will be transported to the gas shield welding position, then adjust the welding gun unit to make sure the CO2 welding head is...

Catalog: Box Beam Welding Line

BOX BEAM ASSMEBLING MACHINE
inquiry

Products description:
Model No:XXZ12
XXZ12 BOX BEAM ASSMEBLING MACHINEAccording to the processing features and requirement of box beam, the cover plates of 4 sides must be connected tightly with the internal reinforcing plates to avoid the out-flowing of slag liquid when doing electro-slag welding. At same time the internal...

Catalog: Box Beam Welding Line

Products description:
Model No:XZHB12
XZHB12 ELECTRO-SLAG WELDING MACHINEThis machine is mainly used for the welding of cover plate of box beam and inner side welding seam of reinforcing plate inside box beam. It consists of base, column, lifting arm, welding gun moving carriage, welding gun cross adjusting unit, wire reel and...

Catalog: Box Beam Welding Line

Products description:
Model No:XMHB12
XMHB12 SUBMERGED ARC WELDING MACHINEThis machine is the key equipment to do submerged arc welding on box beam, its movement is very stable and is very convenient for operation. 1 Box width mm 300-1200...

Catalog: Box Beam Welding Line

MOVABLE OVERTURN EQUIPMENT
inquiry

Products description:
Model No:XF12
XF12(90º, 180º) MOVABLE OVERTURN EQUIPMENT90 degrees movable overturning support is mainly used to overturn the Box-beam with different side upward. Each group consists of 2 units of movable overturning support, working together with the transporting roller then can finish each working...

Catalog: Box Beam Welding Line

ROLLER CONVEYOR
inquiry

Products description:
Model No:XGD
XGD ROLLER CONVEYORThe transporting roller is designed according to the Box-beam production procedure to work together with other working procedures to finish the transporting function of the work-piece to the different processing equipments. In order to meet the transporting requirement of the...

Catalog: Box Beam Welding Line

MOVABLE TRA-CART
inquiry

Products description:
Model No:YG16
YG16 MOVABLE TRA-CARTThe steel conveyor is designed according to the Box-beam production procedure to work together with other working procedures to finish the transportation of the work-piece to the different processing equipments. The steel conveyor has two kinds of movements: traveling and...

Catalog: Box Beam Welding Line

Products description:
Model No:ZHG2500
ZHG2500 HEAVY DUTY H-BEAM ASSEMBLING MACHINEZHG2500 heavy duty H beam auto assembling machine is the main equipment to assemble H-Beam steel structure, which fits with several mechanical hands to realize the positioning and clamping of steel plate. It equipped with Hydraulic, pneumatic elements,...

Catalog: H-Beam Assembling Machine

Products description:
Model No:MZG
MZG GANTRY TYPE SUBMERGED ARC WELDING MACHINEGantry type submerged arc welding machine is the mature machine that JINFENG designed for steel structure industry. It is special for welding the H beam or T beam steel structure. The machine span is different with beam height....

Catalog: H-Beam Welding Machine

Products description:
Model No:TM
TM T-TYPE SUBMARGED ARC WELDING MACHINET type ( side-controlled )of submerged arc welding machine is also for H beam or T beam welding. But the structure is different from gantry, which makes the height of H beam is not limit by the gantry. It can save some space. 1...

Catalog: H-Beam Welding Machine

Products description:
Model No:XMH
XMH COLUMN TYPE H BEAM WELDING MACHINEXMH column type submerged arc welding machine is used on beam automatic welding line to make sure the production line. The machine structure is simple, easy operation, high automation and safe work. Normally, at least 2 sets of XMH are needed on one welding...

Catalog: H-Beam Welding Machine

STRAIGHTENING MACHINE
inquiry

Products description:
Model No:JZ40
JZ40 STRAIGHTENING MACHINEThis equipment is suitable for straightening on the T and H beam that have after welding. Because when welding the beam structure, then welding seam shrink then cause the flange distortion, thus need straightening on the flanges, therefore this equipment is the perfect...

Catalog: H-Beam Straightening Machine

Products description:
Model No:YJZ80
HYDRAULIC STRAIGHTENING MACHINEYJZ80 hydraulic straightening machine is specially designed for the straightening of Heavy duty H beam, which has big different with the normal H beam straightening machine. It adopt the straightening principle of pressing wheel stretching at same axis line, and the...

Catalog: H-Beam Straightening Machine

180ÂºOVERTURN EQUIPMENT
inquiry

Products description:
Model No:YF08B/C
YF08B/C 180ºOVERTURN EQUIPMENTThis kind of equipment has B and C type. YF08B type is used for the overturning of H beam at 180 degrees for the purpose of welding another side of welding seam. YF08C type not only can overturn at 180 degrees but also can overturn at 90 degrees. YF08C type is...

Catalog: Auxiliary Beam Handling System

BAFFLE ASSEMBLING MACHINE
inquiry

Products description:
Model No:XJZ12
XJZ12 BAFFLE ASSEMBLING MACHINEThis equipment is the special machine is used to assemble and weld the middle reinforcing plate in the middle of box beam. The operation on the equipment is simple and easy. It consists of base support, turning working table, turning transmission device, clamping...

Catalog: Box Beam Welding Line

END-FACE MILLING MACHINE
inquiry

Products description:
Model No:XM1510
XM1510 END-FACE MILLING MACHINEBecause of the high speed development of the society, the engineering quality level for the steel structure required by people is higher and higher, then the jointing face to face of H beam, Box-beam and long thin parts, thus the end-face milling become a very...

Catalog: Box Beam Welding Line

BACKING WELD MACHINE
inquiry

Products description:
Model No:XQHB-CO2
XQHB CO2 BACKING WELD MACHINEThis machine is made for the purpose of CO2 gas shield welding on the box-beam that has finished the assembling. The box-beam after assembling will be transported to the gas shield welding position, then adjust the welding gun unit to make sure the CO2 welding head is...

Catalog: Box Beam Welding Line

BOX BEAM ASSMEBLING MACHINE
inquiry

Products description:
Model No:XXZ12
XXZ12 BOX BEAM ASSMEBLING MACHINEAccording to the processing features and requirement of box beam, the cover plates of 4 sides must be connected tightly with the internal reinforcing plates to avoid the out-flowing of slag liquid when doing electro-slag welding. At same time the internal...

Catalog: Box Beam Welding Line

Box Beam Welding Line

Product Catalogue