Find C Channel Forming Machine, C Forming Machine, C Lipped Channel Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Tank Shape Forming Machine > C lipped channel forming machine

C lipped channel forming machine

  • C lipped channel forming machine
  • C lipped channel forming machine
  • C lipped channel forming machine
  • C lipped channel forming machine

C lipped channel forming machine

    Payment Type: L/C,T/T,D/P
    Terms of Trade: FOB,CFR,CIF
    Min. Order: 1 Set/Sets
    Delivery Time: 60 Days
    Packaging: plastic film full packaged, and loaded into the standard container
    Productivity: 20 sets per month
    Brand: CH
    Transportation: Ocean,Land
    Place of Origin: China, Wuxi
    Supply Ability: 300 sets per year
    Certificate: CE,ISO9001
    HS Code: 8455221000
    Port: Shanghai Port,Tianjin Port

Basic Info


Product Description

C lipped channel forming machine

C lipped channel forming machine is a line which can produce different sizes of C purlines by changing the spacer. The character of this C lipped channel forming machine is with low cost, and easy to change the space to adjust the size. The thickness of this C section floor beam is 1.5-3.0mm, size is from 80-300mm. For any sizes you need, we will know it and custom design the machine for you. We need to know the flange, the depth, the thickness,the lips.

C section roll forming machine (5)

C section roll forming machine (6)

C section roll forming machine (1)

Steel thickness (t): from 1,5 mm to (at least) 3,0 mm;
Profile height (h): from 100 mm to (at least) 300 mm;
Flange width (b): from 40 mm to (at least) 80 mm;
Flange height (c): from 12 mm to (at least) 20 mm;
Maximum hole diameter deviation: +2 mm/-0 mm
Minimum finished product length: at least 1500 mm;
Maximum finished product length: at least 12000 mm;
Length tolerance: ±1.5mm per each pieces

C section roll forming machine (2)

C section roll forming machine (3)

C purlin roll forming machine (8)

C lipped channel forming machineincluding below parts:

Technical Specification
Ⅰ: General properties
Maximum production speed: not less than 15 meters per minute excluding cutting and punching);
Bending precision: the maximum profile deviations (dimensions and shape) shall not exceed the tolerances specified as following data (or equivalent tolerances);
Bending quality: ability to bend the profiles of the specified configuration at the specified maximum steel thickness; cracking of the steel or metal coating is not permitted for all required steel grades.

CZ purline machine

The 3 tons manual decoiler, the feeding leveling system, the main roll forming machine, the hydraulic cutting system and receiving table.

Below is the working flow for your reference:

steel frame machine

C purlin roll forming machine (1)

Below are some pictures for your reference:

C purlin roll forming machine (4)

This is the adjustable cutting system, by this adjustable cutting system, you can cut any size you need, but no need to change the cutting blade. Just adjust the shaft left or right, up or down. This C section floor beam C purline machine cutting system is popular in the C purline roll forming machine.Easy to control, but with low cost.

C purlin roll forming machine (7)

C purlin roll forming machine (7)

3T decoiler
Dimensions: 1700mm*1000mm*800mm
Width of feeding: 300mm
Capability: 3Ton
Range of expand(by manual): 420mm-510mm
Mode of expand &fight: inner expand &fight by manual
Way of feeding: manual
Color: Blue (or base on customer request)
Quantity: 1

C purlin rolling machine (3)

Adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.
Feeding type: adjustable
Feeding width range:200-600mm
Entrance and guide roller: diameter is ¢65mm, material is SAE1045, HRC48-52° surface with chrome
The quantity of leveler rolls must be planned according to thickness 1.5mm to 3.0mm.
Flattener roller: upper is 3 rollers, down is 4 stations(total is 7 rollers)
Flattener roller material: SAE 1045 thermal treatment hardness 48-52 HRC.
Diameter of flattener shaft: ¢76mm, material is SAE 1045, hardening and tempering
Drive by motor: 4kw AC motor (Guomao of China)

steel frame machine

steel frame machine

C purlin rolling machine (4)

Base on customer provide punching drawing, this machine need adopt two units hydraulic punching system
The punches will be connected to a single hydraulic unit having tank, motor, pump, pressure control valves, pressure gauges, solenoid valves, hydraulic hoses, all designed to operate safely at the required operating pressure; also to facilitate changing O-ring they must be of standard size, also consider suitable cooling unit.
The punches and dollies will be CR-12, hardness HRC 58-62 and chrome coating both punches and dolies should be easily replaceable without requiring disassembly of complete units.
The whole punching operation should be automated and controlled by a program installed in the PC which is located in the operator's console.
Hydraulic power: 5.5kw
Working pressure: 12-16Mpa
Sample photo for reference:

The main motor system of the adjustable roll forming C Section Floor Beam rollformer.

C purlin roll forming machine (4)

Forming Section
Material of the profile: steel sheets for cold bending according to EN 10346 or equivalent requirements, steel grades to (at least) S450 GD, or other grade of steel with equivalent yield strength, with metal coating from Z100 to (at least) Z350;
Thickness range: 1.5-3.0mm
Maximum production speed: not less than 10 meters per minute (for non-perforated profiles, excluding cutting)
Machine Voltage, Frequency, Phase:380 V, 50 Hz, 3Phase
Roll station:14 stations
Roller material:ASTM52100 chrome plated surface with hardness 58-62 degree ,CNC,
Shaft diameter: ¢76mm material: SAE1045 with quenching and tempering
Transmission: by chain, one inch, double line
Roll former has leveling bolts in the base for adjust the leveling
Machine base frame adopt H beam welding steel
In the main roll forming machine have 2 buttons for urgency stop if happen any malfunction.
Machine adopt iron cast as station to make machine in strong
To avoid accidents,all of drive part adopt protect cover
Color of machine: Blue and yellow (or base on customer request)

C purlin rolling machine (1)

CZ steel frame machine

C purline rollformers (4)

C purline rollformers (2)

C purline rollformers (3)


 Wuxi Zhongtuo Roll forming machinery Co.,Ltd has been specialized in rollforming lines and rollformer for a long history of 35 years.Zhongtuo rollformer equipments are designed and manufactured according to the desired cross-section profile from customers. The rollforming lines are widely used in contract munufacturing, construction, fenestration, HVAC, pallet racking and storage, aerospace, transportation, automative, strut framing channel, cable tray, coredwire and so on.

Zhongtuo rollformers, with hydraulic holes punching, logo punching, inline notching, flying track servo motor cut to length, as well as servo motor fly tracking high speed and rafted options for productivity optimization.

Wuxi Zhongtuo factory exported the machines to almost every contry in the world, United state, the England, France, Italy, Canada, Australia, Switzerland, Belgium, and Argentina, bolivia, Dominica republic, Azerbaijan, Russia, Saudi Arabia, Indian, Philippiness and many other countries in the world.

There are about 100 staffs working in our factory, 20 engineers who are the specialist in these machine designing fields.We are concentrate on the machine quality and customer's need, keeping improving the machine designing and technology to satisfy customer's require. We sincerely hope to establish cooperate with you and be sure to offer high quality rollformers and service for supporting your buiness!

Company Info

  • Representative: Xu Lianxing
  • Product/Service: Rollforming line , Rollformer , Roll forming machine , Steel framing rollformer , Tile Making Machine , Tube processing machine
  • Capital (Million US $): 5000000
  • Year Established: 1984
  • Total Annual Sales Volume (Million US $): Above US$100 Million
  • Export Percentage: 61% - 70%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 100
  • No. of R&D Staff: 21 -30 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): Below 1,000 square meters
  • Factory Location: jiangsu province, suzhou city, economic development zove B18
  • Contact Person: Ms. Elena Wang
  • Tel: 0086-0512-5688770
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters