Model No.: DZ-1542TA
The application range of ultrasonic plastic Welding Machine is extremely wide, and it are often utilized in the car industry, household appliance industry, industry and toy business . the dimensions of the products it welds is little and medium, like charger boxes, Barbie dolls and toy cars. The welding work of the Plastic Ultrasonic Welding Machine is fast, and therefore the welding products are of top quality . The ultrasonic welding machine also can weld car lights.
Before using the plastic ultrasonic welding machine to weld the car lights, you ought to select the acceptable welding head and base film consistent with the model of the car light.
Then lock the welding head screws on the welding head of the ultrasonic plastic welding machine, rotate the lifting hand wheel of the machine, and lift the machine to a correct position about 300 mm high from the joint surface, then tighten the four horizontal adjustment screws of the welding head. The expansion cone is fixed at the center position of its rotation range until the welding head is screwed by hand until it cannot rotate.
DZ-1542TA Ultrasonic welding machine
car tailight, headlight ,sidelight ,car lamp
Delay Time/Weld time/Hold Time
Max output power
Accurate temperature control/Flexible Manufacturing/Low Maintenance Cost/Sustainable/Low Noise Level/High Safety Level/Easy to Operate/Long Service Life/High Rigidity/High-accuracy
Secondly, adjust rock bottom mold and welding horn of the ultrasonic plastic welding machine, activate the atmospheric pressure source, adjust the pressure to 2kg/cm, and place rock bottom mold steadily on rock bottom bed during a more convenient operation direction. Turn the machine lifting handwheel to 100 mm below the working surface of the welding head, activate the most power turn on the vibrating box, and set the selector on the ultrasonic plastic welding machine to the manual position.
Adjust the welding head of the ultrasonic plastic welding machine, loosen the four horizontal adjustment screws, align the welding head position with the workpiece, turn the machine lifting hand wheel, press the welding head to the workpiece, adjust the position of rock bottom mold, and make the welding head match the workpiece then , fix four horizontal screws on the average , fix rock bottom mold again, and switch the machine lifting hand wheel to lower the machine to the position of the welding machine, and await welding.
Finally steel oneself against welding, manually select the switch position of the ultrasonic plastic welding machine, press the up and down button on rock bottom bed, check the welding situation, set the descending speed and dealing pressure, adjust until there's no noise when lifting, and set the welding time. After debugging, you'll formally use the ultrasonic plastic welding machine for welding production work.
Wuxi DIZO Ultrasonic Technology Company
WUXi DIZO ULTRASONIC TECHNOLOGY CO.,LTD is a professional manufacturing factory of plastic welding equipment .With 15 years of ultrasonic plastic welding research ,development and manufacturing experience, the company provides plastic welding special equipment and plastic welding equipment solution for thousands of enterprises such as Volkswagen, BYD, Siemens, Haier, Panasonic and so on. The company has 18 sets of processing equipment, 2 assembly lines, and an annual output of 900 sets of equipment. Products include: ultrasonic plastic Welding Machine equipment, professional welding equipment for automotive interior parts, automotive door panel Production Line solutions, high-frequency welding equipment and other special industry equipment.
In the past 10 years, Dizo has obtained 12 patents and has been rated as a quality trustworthy organization for many times, and has cooperated with Hangzhou Jiliang University and Changzhou Hohai University for many times. The company's complete business system from R&D, manufacturing, sales to service has also been well received by customers for many times.
• Our goal: To become a well-known brand in the field of plastic welding.
• Our Responsibilities: We connect not only our products, but our people, customers, suppliers, and our communities through our products.
• Our Approach: Connecting customers with honesty and retaining customers with quality.
- Company Name: Wuxi DIZO Ultrasonic Technology Company
- Representative: FANG HOU REN
- Product/Service: Ultrasonic Weding Machine , Ultrasonic Plastic Welder , High Frequency Welding Machine , Ultrasonic Handheld Spot Welder , Hot Plate Welding Machine , Platic Welding Machine
- Capital (Million US $): 5000000RMB
- Year Established: 2013
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 5
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: Chunxiang Industrial Park, Xishan District, Wuxi
- Contact Person: Mr. fanjiawei
- Tel: +86-0510-83773953
Premium Related Products